Image
Product
Price
- Ductile Casting; 220mm; 24T/25.0mm Spline Clamp Load: 1538 lbs.~Clutch Torque: 297 ft./lbs.~Torque At Flywheel: 233ft./lbs.~Torque Capacity At Wheels: 187 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 220mm; 24T/25.0mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Acura Integra | L | 1834 | 4 Cyl 1.8L | - |
- Ductile Casting; 220mm; 24T/25.0mm Spline Clamp Load: 1538 lbs.~Clutch Torque: 297 ft./lbs.~Torque At Flywheel: 233ft./lbs.~Torque Capacity At Wheels: 187 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 220mm; 24T/25.0mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Acura Integra | L | 1834 | 4 Cyl 1.8L | - |
- Pedal to switch plunger. Suitable for either the brake or clutch pedal.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura NSX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- For Secondary Gear
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body |
|---|---|---|---|
| 1991 - Acura Legend | Rear | LS | Sedan |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- For Secondary Gear
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Acura Legend | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 18mm
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura NSX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura Legend |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 46x70x8mm
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura Legend |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura Integra |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Input (44x68x8mm)
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Acura Integra |
Showing 1 - 10 of 57 products
Loading...