Image
Product
Price
- Always replace fuel filter when injector is replaced.
- Reman Multi Port Fuel Injector
- GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Honda Passport | V | 3165 | 6 Cyl 3.2L | - |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Honda Civic | L | 1590 | 4 Cyl 1.6L | - |
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 6
- Maximum Pressure: 94.0
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-tank
- System Pressure: 30 Psi
- Terminal Type: Pin
- Terminal Gender: Male
- Average Flow Rating: 26
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Honda CR-V | L | 1972 | In-Tank | 4 Cyl 2.0L | - |
- Fuel Pump - Electric In Tank
- Includes Hose, Clamps, Grommet, Rubber Sleeeve, Tank Seals, and Wire Harness
- Product Attributes:
- Voltage: 12v
- Minimum Flow Rating: 33.0
- Negative Ground: Yes
- Mounting Hardware Included: No
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 114.0
- Fuel Pump Inlet Type: Strainer
- Connector Shape: Rectangle
- Outlet Outside Diameter: 9.0
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Minimum Pressure: 60.0
- Seal And Lock Ring Included: No
- Wiring Harness Included: Yes
- Terminal Type:
- Blade
- Spade
- Terminal Gender: Male
- Inlet Outside Diameter: 11.0
- Regulator Included: No
- Outlet Fitting Thread Size: 1/2
- Strainer Included: No
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
1234663, 152017, 17040-3S500, 17040-3S505, 17040-3S510, 17040-3S515, 17040-5S105, 17040-S3M-A00, 17042-5M015, 17042-7B025, 1W1Z 9H307-BD, 1W1Z 9H307-BG, 2910231, 2910247, 2910313, 2950001, 2950190, 2C2Z 9H307-CB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Honda Accord | V | 2997 | In-Tank | 6 Cyl 3.0L | - |
- E85 Hi Flow Fuel Pump
- 340lph E85-Compatible High Flow In-Tank Fuel Pump 65mm Body Offset Inlet no hooks, Inline, Incl Fuel Pump, installation instructions, wiring harness, pre filter and o-rings, Hardware is not application specific
- 320lph E85-Compatible High Flow In-Tank Fuel Pump
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- 320lph E85-Compatible High Flow In-Tank Fuel Pump (65mm Short Offset Inlet, Inline). 320lph@43psi. Includes Fuel Pump, installation instructions, wiring harness, pre filter and o-rings. Included hardware is not application specific.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Honda Accord | L | 2254 | United States | 4 Cyl 2.3L | LX | - |
- Hi Vol Fuel Filter
- High Volume Fuel Filter, Black Anodized, Fits Acura & Honda, Inlet: 14mm X 1.5, Outlet: 12mm X 1.25
- High Volume Fuel Filter;Black
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- High Volume Fuel Filter. Black. Acura & Honda. Inlet: 14mm X 1.5 Outlet: 12mm X 1.25
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Honda CR-V | L | 1972 | B20B4 | United States | 4 Cyl 2.0L | LX | - |
- Hi Vol Fuel Filter
- High Volume Fuel Filter, Black Anodized, Fits Acura & Honda, Inlet: 14mm X 1.5, Outlet: 12mm X 1.25
- High Volume Fuel Filter;Black
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- High Volume Fuel Filter. Black. Acura & Honda. Inlet: 14mm X 1.5 Outlet: 12mm X 1.25
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Honda Odyssey | L | 2234 | F23A7 | United States | 4 Cyl 2.3L | EX | - |
- E85 Hi Flow Fuel Pump
- 340lph E85-Compatible High Flow In-Tank Fuel Pump 65mm Body Offset Inlet no hooks, Inline, Incl Fuel Pump, installation instructions, wiring harness, pre filter and o-rings, Hardware is not application specific
- 320lph E85-Compatible High Flow In-Tank Fuel Pump
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- 320lph E85-Compatible High Flow In-Tank Fuel Pump (65mm Short Offset Inlet, Inline). 320lph@43psi. Includes Fuel Pump, installation instructions, wiring harness, pre filter and o-rings. Included hardware is not application specific.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Honda Accord | L | 2254 | United States | 4 Cyl 2.3L | DX | - |
- PRO-TEC Air Filter Panel
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Duty Type: Ld
- Length: 10.768
- Style: Air Filter Panel
- Media Material: Synthetic
- Class: D
- Cubic Feet Per Minute Rating: 160
- Protec Air Filters provide good engine protection for everyday normal driving conditions throughout a traditional air filter change interval. These filters are designed to match the OES in media area. Air filter Laboratory Tests per ISO 5011: 97.5% minimum efficiency (Based on PRO-TEC 362)
This Part Fits the Following OEM/Substitute Numbers:
26443, 346, 36443, 46443, 5000203887, 619-46443, 6443, 66443, 88443, 9-46443, A 29119, A1611C, A25248, A5248, A764, AF 7919, AF1037, AF1037F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Honda Accord | L | 2254 | Mexico | 4 Cyl 2.3L | - |
- Fuel pump installation kit
- For Use w/Fuel Pump PN[F20000141/F20000313/GSS250/GSS317/GSS342]
- Complete hardware kits ensure easy installation and reliable operation.
- Fuel Pump Installation Kit
-
Features:
- Installation Kit
- This Installation Kit (application specific) has the following Features and Benefits: Race-proven design for high-pressure high-flow engines, technology for installing TI Automotive High Performance fuel pumps, performance that excites, direct-fit replacement design, and all installation components included (does not include fuel pump).
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Honda Civic | L | 1588 | D16B5 | CNG | 4 Cyl 1.6L | 98 |
Showing 1 - 10 of 203 products
Loading...