Image
Product
Price
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2003 - Chevrolet Silverado 1500 | WT | RWD |
- Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators
- Heavy Duty Rear LED Bumper; Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators;
- Heavy Duty Rear LED Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
- Bumper Style: Light Mount
-
Features:
- Easy To Install!
- Durable
- Steel Construction
- Includes [2] Rough Country Led Cubes
- Integrated Steps For Easy Access To Bed
- Retains Factory Receiver Hitch
- Includes Backup Sensor Relocators
- Give the rear of your F-250 / F-350 an aggressive, new appearance with Rough Countrys Rear LED Bumper. This easy-to-install upgrade gives your truck an improved look and better functionality, with two pre-installed Rough Country LED cubes that offer impressive off-road illumination! Rough Countrys Rear LED Bumper is made of a durable, all-steel construction thats ready to handle whatever you dish out. Each bumper features two Rough Country Black-Series 2in LED Flush Mount Cubes for rear illumination, and two integrated steps for easy access to the bed. Each bumper also includes sensor relocators to allow you to retain the vehicles anti-collision system. Unlike some aftermarket bumpers for this model, Rough Countrys LED Rear Bumper allows you to retain the factory receiver hitch for towing.Rough Countrys Rear LED Bumper is easy to install with common tools in a home garage! Best of all each bumper includes a 3-year warranty!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Ford F-350 Super Duty | Rear |
- Pair; Forged; Tie Rod Assemblies
- Heavy Duty Tie Rod Kit; Pair; Forged; Tie Rod Assemblies;
- Heavy Duty Tie Rod Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Heavy Duty Replacement Tie Rod Assemblies. Bend Resistant
- Replaces The OE Inner And Outer Tie Rod Assembly
- Sold In Pairs
- Forged SAE1045 Steel Outer Tie Rod With Heat-Treated 4140 Ball Stud
- 4140 Inner Adjustment Shaft With A SAE1045 Steel Ball-Joint Housing
- 22mm Adjustment Threads
- Dont settle for weak tie rods! You want your steering and suspension to be as strong as the truck you love. Thats why you need Rough Countrys HD Forged Tie Rod Kit. This upgrade is a great replacement for stock parts, especially if youre going off-road or towing a heavy load. Our tie rod ends give you a smoother ride, better turn-in response, and increased safety. Because sometimes stock just isn't strong enough and Reliable. You never know what kind of terrain you'll encounter or what obstacles may get in your way. Thats why you can rely on the rugged durability of our HD Tie Rod Kit to keep you going where you need to go. They are bend-resistant, have 22mm adjustment threads, and replace the inner, and outer tie rod ends. These heavy-duty tie rod end assemblies are made with forged steel and include an adjustable shaft and steel ball-joint housing. With these heavy-duty replacements, you can keep your vehicle on the road and out of the shop. Installation Rough Countrys Tie Rod Kit is a no-cutting, bolt-on installation. Warranty. Rough Countrys HD Forged Tie Rod Kit comes with our industry-leading warranty.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - GMC Sierra 2500 HD | 4WD |
- 1 in. Block And Thread Size 9/16 inch; Inside Width 3.25 in.; Inside Length 10.5 in.; Round; E-Coated Black
- U-Bolt Kit; 1 in. Block And U-Bolt Kit; Thread Size 9/16 inch; Inside Width 3.25 in.; Inside Length 10.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford F-150 |
- Maintains Draglink Alignment; Maintains Turning Radius; Fits 6 in. Lifts
- Pitman Arm; Maintains Draglink Alignment; Maintains Turning Radius; Fits 6 in. Lifts;
- Pitman Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Maintains Proper Draglink Alignment
- Maintains Optimum Turning Radius
- Helps Reduce Steering Vibrations
- After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2003 - Ford F-350 Super Duty | Front | XL |
- Lug Nut Set; M14x2.0; Set Of 32; Black
- Wheel Installation Kit; Lug Nut Set; M14x2.0; Set Of 32; Black;
- Wheel Installation Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Bulge Acorn Type Lug Nuts
- Thread Size M14x2.0
- Includes Socket Key For Easy Installation And Removal
- Cold Forged Carbon Steel With Enhanced Rigidity
- Long Lasting Finish
- Exceeds OEM Standard In Material/Strength/Hardness
- Corrosion Resistant
- Easy To Install
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford Expedition |
- 2.5 in. Lift Install Time 2-3 Hours~Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
- Leveling Lift Kit; 2.5 in. Lift;
- Leveling Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels Front Of Vehicle w/The Rear
- Leveling Lift Kit; 2.5 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Ford Expedition | V | - | 8 Cyl 5.4L | 330 |
- 2.5 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
- Leveling Lift Kit; 2.5 in. Lift;
- Leveling Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels Front Of Vehicle w/The Rear
- Leveling Lift Kit; 2.5 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Ford Expedition | V | - | 8 Cyl 5.4L | 330 |
- Includes Shackles Bushings; Hardware Rear; 1-2.5 in. Drop~Install Time 1-2 Hours
- Lowering Shackles; Includes Shackles Bushings; Hardware;
- Lowering Shackles
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 100 pct. Bolt-on Installation
- Maintains Factory Ride Quality
- Fine Tune The Stance Of Your Truck
- Lower the rear of you GM/F-150 with Rough Countrys 1-2.5in lowering shackles! From the factory, your GM/F-150 sits lower in the front than the rear. This economical and simple lowering shackle makes it easy to reduce the amount of rear height, giving you a level look from front to back for an drastically improved appearance. Installation has never been easier. Rough Countrys lowering shackles offer two mounting holes for installation allowing your truck to be lowered 1-2.5 inches. These heavy duty shackles are constructed of .25 steel offering O.E. style rubber bushings to face the road ahead. Best of all Rough Countrys lowering shackles are back by Rough Countrys Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2003 - Ford F-150 | Rear | XLT |
- 2.5 in. Block And Thread Size 9/16 inch; Inside Width 2.5 in.; Inside Length 10.5 in.; Square; E-Coated Black
- U-Bolt Kit; 2.5 in. Block And U-Bolt Kit; Thread Size 9/16 inch; Inside Width 2.5 in.; Inside Length 10.5 in.; Square; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2003 - GMC Sierra 1500 | SLE | 4WD |
Showing 1 - 10 of 827 products
Loading...