Image
Product
Price
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - GMC K1500 |
- 2 in. Lift Install Time 1-2 Hours~Includes The Following Parts~Torsion Bar Adjuster Keys
- Front Leveling Kit; 2 in. Lift;
- Front Leveling Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- 100 Pct. Simple Bolt-On Installation
- Levels Front Of The Vehicle w/The Rear
- Get that killer level look and run up to 32- in. tires with our 2- in. Leveling Suspension Kit for 88 - 98 Chevy / GMC 1500. This torsion bar leveling kit features a set of durable forged torsion keys that level the front of your truck with the rear. Forged torsion keys are much stronger than cast, and ours are ready to stand up to the elements and take whatever you can dish out. Installation is a c in. featuring a 100% bolt-on procedure, so youll be ready and rolling in no time.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1995 - Chevrolet Tahoe | V | - | Front | 8 Cyl 5.7L | 4WD | 350 |
- 2-3 in. Lift; Includes Upper Control Arms/Moog Ball Joints; Diff Drop brkt.; Torsion Bar Adjuster Keys; Shock Reloc. Brkt.; Blocks; U-Bolts; Hardware Superseded From PN[165.20]
- Suspension Lift Kit; 2-3 in. Lift; Includes Upper Control Arms/Moog Ball Joints; Diff Drop brkt.; Torsion Bar Adjuster Keys; Shock Reloc. Brkt.; Blocks; U-Bolts; Hardware;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 2.5 In.
- 3 In.
- WARNING CA Proposition 65: No
- Lift/Drop Height:
-
Features:
- Redesigned For Easier Installation
- Maintains Stock Geometry
- Increased Ground Clearance
- Control Arms Includes Moog Problem Solver
- Pressed-in Ball Joints To Ease Installation
- Control Arms Includes Clevite Brand Orem Style Rubber Bushings
- Forged Torsion Bar Keys Are Stronger And More Durable.
- Fabricated Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- This 3 in. kit now includes Clevite brand OEM style bushings, proven to hold up to even the most rough and tumble trailblazers, and features increased vibration dampening. A set of MOOG Problem Solver pressed in ball joints also ship with this kit; pre-pressed in to expedite installation and requires no reaming or modifying the spindle. This kit also includes our new N3 Shocks - custom tuned for balanced on and off-road use - as well as forged torsion bar adjuster keys, a differential drop bracket, and your choice of rear fabricated lift blocks or add-a-leaf sets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - GMC K1500 | V | - | 8 Cyl 5.0L | 305 |
- 4 in.; 47.75 in. Length; 8.75 in. Uncompressed Arch; 28.75 in. Uncompressed Half Length
- Leaf Spring; Rear; 4 in.; 47.75 in. Length; 8.75 in. Uncompressed Arch; 28.75 in. Uncompressed Half Length;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
- Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Jeep Cherokee | Rear |
- 2-3 in. Lift; Includes Upper Control Arms/Moog Ball Joints; Diff Drop brkt.; Torsion Bar Adjuster Keys; Shock Reloc. Brkt.; Add-A-Leafs; U-Bolts; Hardware Superseded From PN[170.20]
- Suspension Lift Kit; 2-3 in. Lift; Includes Upper Control Arms/Moog Ball Joints; Diff Drop brkt.; Torsion Bar Adjuster Keys; Shock Reloc. Brkt.; Add-A-Leafs; U-Bolts; Hardware;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 2.5 In.
- 3 In.
- WARNING CA Proposition 65: No
- Lift/Drop Height:
-
Features:
- Redesigned For Easier Installation
- Maintains Stock Geometry
- Increased Ground Clearance
- Control Arms Includes Moog Problem Solver
- Pressed-in Ball Joints To Ease Installation
- Control Arms Includes Clevite Brand Orem Style Rubber Bushings
- Forged Torsion Bar Keys Are Stronger And More Durable.
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- This 3 in. kit now includes Clevite brand OEM style bushings, proven to hold up to even the most rough and tumble trailblazers, and features increased vibration dampening. A set of MOOG Problem Solver pressed in ball joints also ship with this kit; pre-pressed in to expedite installation and requires no reaming or modifying the spindle. This kit also includes our new N3 Shocks - custom tuned for balanced on and off-road use - as well as forged torsion bar adjuster keys, a differential drop bracket, and your choice of rear fabricated lift blocks or add-a-leaf sets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - GMC K1500 Suburban | V | - | 8 Cyl 5.7L | 350 |
- 6 in. Lift; Includes M1 Series Shock Absorber; Front/Rear Crossmember; UCA/LCalifornia Drop Brackets; Kicker Bar; Front/Lower Skid Plate; Steering Link
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes M1 Series Shock Absorber; Front/Rear Crossmember; UCA/LCalifornia Drop Brackets; Kicker Bar; Front/Lower Skid Plate; Steering Link;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: No
-
Features:
- Redesigned For Easier Installation
- Track Width Remains Stock
- Increased Ground Clearance
- Fabricated Blocks Are Stronger And Offer A Longer Lifespan Than Cast Blocks
- Torsion Bar Drop Brackets And Front Skid Plate Feature Rc Laser Cut Logos
- Includes Application Valved M1 Series Shock Absorbers Which Offer The Best In Balanced
- Performance For On And Off-Road Use
- Get a huge boost for your 88 - 98 Chevy / GMC 1500, Tahoe, and Suburban with Rough Countrys all-inclusive 4- in. Suspension Lift. This kit features a set of beefy front and rear crossmembers and differential drop brackets, this kit can take what you dish out and keep on kicking. A set of drop-torsion bar brackets and a durable front skid plate both feature laser-cut RC logos that peak out from under the frame, giving your vehicle an unmistakable look. Rough Countrys 6 in. Suspension Kit features (4) M1 monotubed shocks, giving your truck incredible ride-quality both on and off-road. This kit ships with a massive steering link and heim joint assist link. Rear lift blocks and add-a-leafs give plenty of clearance - enough to accommodate up to 33- in. tires. Our new and improved design allows your vehicle to retain its stock track width, and installation is now even easier. This all-inclusive kit comes with everything you need, and best of all this kit features Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Chevrolet K1500 | V | - | 8 Cyl 5.0L | 305 |
- Hidden; Front; Black Carbon Powder Coating
- Winch Mounting Plate; Hidden; Front; Black Carbon Powder Coating;
- Winch Mounting Plate
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Installation
- Hidden Install Behind The Front Bumper
- Only Fairlead And Tow Hook Are Visible
- Durable Black Carbon Powdercoating
- Will Accommodate Most Winches On The Market
- Give your truck a sleek recovery system that still turns heads with Rough Countrys Hidden W in. Mount for 88-98 Chevy/GMC 1500 models. This subtle yet innovative design capitalizes on the ample space behind the front bumper to mount your RC PRO series or other standard sized w in. while keeping everything neat and tidy. A durable 1/4 in. plate steel w in. mount secures onto the frame for unyielding strength and rigidity suitable for a robust recovery solution. Rough Countrys 88-98 GM Hidden W in. Kit installs directly into the factory bumper giving a striking visual appearance that lends to the overall look of your truck. The durable, steel w in. plate features a laser-cut 'œRC' logo and can accommodate either a hawse or roller fairlead. Includes a lifetime replacement guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Chevrolet K1500 |
- Includes Mounting Brackets and Hardware Superseded From PN[87386.20]
- N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
- N3 Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - GMC C1500 | Front |
- Rear; 2.5-6 in.; Monotube; 30.08 in. Extended Length; 17.8 in. Collapse Length; w/2.5 - 6 in. Lift
- M1 Shock Absorber; Rear; 2.5-6 in.; Monotube; 30.08 in. Extended Length; 17.8 in. Collapse Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 17.800 In.
- Shock Stroke: 12.280 In.
- WARNING CA Proposition 65: No
- Extended Length: 30.080 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - GMC K1500 | Rear |
- 6 in. Lift; Includes Spindles; Lift Blocks; Coil Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Spindles; Lift Blocks; Coil Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Fabricated Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- New Coil Springs Breath Life Back Into Older Suspension.
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Get a total transformation for your truck with Rough Countrys 6- in. Suspension Lift for 88-98 2WD 1500 pickups. This kit offers enough clearance to run 33x12.50 tires for an improved, aggressive look and better off-road performance.Rough Countrys 6- in. Suspension Lift maintains an incredible ride quality. Each kit includes a set of durable coil springs that provide a smooth ride and enhanced vibration damping - a fantastic improvement over the aging factory springs! This kit also includes Rough Countrys premium N3 shocks. These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN tensile strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.Includes a Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - GMC C1500 | V | - | 8 Cyl 6.5L | 395 |
Showing 1 - 10 of 616 products
Loading...