Image
Product
Price
- Centerforce(R) II; Clutch Kit
- 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; 458 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throwout Bearing/Pilot Bearing/Alignment Tool
- Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
- Centerforce® II Clutch Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- This Centerforce(R) II Clutch Full Kit is engineered for off-road enthusiasts who are looking for the ultimate on and off road performance clutch. The Centerforce II clutch set features the patented Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding-capacity and exceptional street characteristics without sacrificing pedal effort.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Jeep Wrangler |
- Dual Friction(R); Clutch Pressure Plate and Disc Set
- 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; 563 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Alignment Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Jeep Wrangler |
- Centerforce(R) Diesel Twin and Flywheel Kit
- 12.250 in. Dia.; 22 Bolt Pattern; 10 Spline; 1 3/8 in. Input Shaft; 1700 ft/lbs Trq.; 152 Teeth; Includes Pressure Plate/Flywheel/Discs
- This Centerforce Twin Disc clutch offers smooth engagement; quiet operation; light pedal; and high-end holding capacity.
- Centerforce Diesel Twin and Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Arp Hardware
- Centrifugal Assist Tuned For Diesels
- Reduced Noise And Vibrations
- Built With Improved Cooling
- Smooth Operation And Max Longevity
- Ball Bearing Design
- 100 Percent Hand Built
- Clutch Specs Card Included
- Available for Dodge Cummins Diesel equipped 2500-5500 trucks. Centerforce announces their NEW Twin Disc clutch set for Heavy-Duty street and towing use. Truck owners pushing power levels up to 1700 ft/lbs will enjoy the smooth and quiet operation this unique clutch set offers. All components are match balanced and ready for installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Ram 2500 | L | - | 6 Cyl 6.7L | SXT | 408 |
- Dual Friction(R); Clutch and Flywheel Kit
- 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; 563 ft/lbs Torque; 146 Teeth; Includes Pressure Plate/Flywheel/T. O. B./Alignment Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- This Centerforce(R) Dual Friction(R) Full Kit with flywheel is engineered for off-road enthusiasts who are looking for the ultimate on and off road performance clutch. The Dual Friction clutch set features the patented Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding-capacity and exceptional street characteristics without sacrificing pedal effort. The high inertia billet steel flywheel helps the engine maintain RPM's in rough terrain.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Jeep Wrangler | V | 3778 | EGT | 6 Cyl 3.8L | 231 |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 1 1/8 in.; 26 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Bearing/Bolts/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- Centerforce I Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 10.4 in. Diameter
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Challenger | V | 6059 | 8 Cyl 6.1L | SRT8 | 370 |
- DYAD(R) DS 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 1300 ft/lbs Trq.; 168 Teeth; Includes Pressure Plate/Discs/Flywheel
- The Centerforce(R) DYAD(R) DS (Drive System) 10.4 Inch patented multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 500 to 1300 ft/lbs.
- DYAD Clutch and Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- No Complicated Setup Or Adjustments Required
- Fully Dampened Clutch Developed For Vehicles W/extreme Power
- Patented Ball Bearing Pressure Plate
- Patented Multi-disc Floating Disc And Drive Disc Design
- Quiet
- Positive Drive Floater
- Smooth Engagement And Light Pedal Effort
- Holds 500 To 1300 Ft/lbs Of Torque
- Precision Balanced
- Greater Longevity
- Arp Fasteners
- Excellent Driver Control
- Comes Preassembled For Your Convenience
- The Centerforce(R) DYAD DS 10.4 in. twin disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1300 ft/lbs of torque at the crank. The pressure plate features our patented centrifugal weight system for superior clamp load over stock and our patented ball bearing actuated pressure plate providing light pedal effort. The discs are equipped with organic segmented facings providing increased holding capacity and the sprung/dampened drive disc provides smooth drivability. DYAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Components are designed, machined and assembled in the USA. DYAD DS clutches are match balanced and ready for installation using the included ARP fasteners.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | LS3 | 8 Cyl 6.2L | Grand Sport | W | Naturally Aspirated | 376 |
- Dual Friction(R); Clutch Kit
- 11 in. Dia.; 1 1/8 in.; 21 Spline; Sprung Full Face/Segmented Organic Disc/T. O. B./Bolts/Alignment Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 11 in. Diameter
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 241 |
- Dual Friction(R); Clutch and Flywheel Kit
- 12 in. Dia.; 14 Bolt Pattern; 26 Spline; 1 1/8 in. Input Shaft; 700 ft/lbs Torque; 168 Teeth; Includes Pressure Plate/Clutch Disc/Flywheel
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Centerforce® Dual Friction Clutch Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Grand Sport | 376 |
- Centerforce(R) II; Clutch and Flywheel Kit
- 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; 458 ft/lbs Torque; 146 Teeth; Includes Pressure Plate/Clutch Disc/T. O. B./Alignment Tool
- Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
- Centerforce® II Clutch and Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Centrifugal Weight Design
- Ball Bearing Pressure Plate
- Light Pedal Effort
- High Inertia Billet Steel Flywheel
- Increased Holding Capacity
- Smooth Engagement
- This Centerforce(R) II Clutch Full Kit with flywheel is engineered for off-road enthusiasts who are looking for the ultimate on and off road performance clutch. The Centerforce II clutch set features the patented Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding-capacity and exceptional street characteristics without sacrificing pedal effort. The high inertia billet steel flywheel helps the engine maintain RPM's in rough terrain.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Jeep Wrangler | V | 3778 | EGT | 6 Cyl 3.8L | 231 |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 925ft/lbs Trq.; 168 Teeth; Includes Pressure Plate/Discs/Floater/Flywheel/Pilot Bearings/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- SST Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Simple Install
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | LS3 | 8 Cyl 6.2L | Base | W | Naturally Aspirated | 376 |
Showing 1 - 10 of 20 products
Loading...